Learning Outcomes

System Definitions and Application

Properties of Thermodynamics

Temperature Scale and Pressure

Illustration of Pressure

Forms of Energy

Forms of Work

First Law of Thermodynamics

Energy Conversion Efficiency

Efficiency of Machines

Basic Concepts and Energy Balance

Continuation of Examples

Lesson Summary

This module presents an introduction to thermodynamics and discusses the concepts of heat, energy, energy transfer, state postulates and more.

Phase Change of Pure Substances

Property Diagrams

Phase Diagrams

Properties of a Pure Substance

Saturated Vapour Liquid

Properties of a Pure Substance II

Equations of State

Properties of Pure Substances (Examples)

In this module, you will learn how to obtain the thermodynamic properties of pure substances and about the ideal gas equation of state.

Energy Analysis

Polytropic Process

Energy Balance of Closed Systems

Unrestrained Expansion

Specific Heat and Enthalpy

Solids and Liquids

Examples of Energy Balance

This module examines the moving boundary work of machines, the energy balance of closed systems, specific heat, Enthalpy and more.

Mass and Energy Analysis

Flow Work and Flow Energy

Steady Flow Devices

Turbines and Compressors

Steady Flow Devices II

Unsteady Flow Devices

Examples of Energy and Mass Balance

In this module you will learn about conservation of mass, as well as steady-flow devices such as nozzles, compressors and turbines.

Heat Engines

Refrigerators and Heat Pumps

Perpetual Motion Machines

Carnot Principles

Carnot Heat Engine

Problems with Second Law of Thermodynamics

Clausius Inequality

In this module, applications of the second law of thermodynamics, Carnot cycles, heat engines, refrigerators and more.

Entropy

Entropy and Isentropic Processes

Entropy of Liquids and Gases

Reversible Steady Flow Work

Isentropic Efficiency

Entropy Balance

Entropy Balance Examples

Continuation of Examples I

Exergy and Second Law Efficiency

Exergy of Closed Systems

Exergy Transfer

Exergy Balance for Control Volume

Examples of Exergy

Continuation of Examples II

Continuation of Examples III

In this module, you will examine the concepts of entropy and exergy and their applications.

Power Cycles

Reciprocating Engines

Diesel Cycle

Brayton Cycle

Brayton Cycle Problems

Examples of Power Cycles

Examples Continued

Vapour Power Cycles

Regenerative Rankine Cycle

Analysis of Vapour Power Cycles

Refrigeration Cycles

Examples of Vapour Power Cycles

In this module, you will learn about power cycles - Otto cycle, Diesel cycle, Brayton cycle and more.

Thermodynamic Property Relations

Thernodynamic Property Relations II

Thermodynamic Property Relations III

Cyclic Relations

Chemical Reactions

Chemical Reactions II

Chemical Reactions III

First Law Analysis of Reacting Systems

Examples of Chemical Reactions

In this module, learn about the relationship between thermodynamic properties and chemical reactions.

Advanced Diploma in Engineering Thermodynamics - Course Assessment

This free online course explores thermodynamics and its applications for solving a range of engineering problems.

Advanced Diploma in Engineering Thermodynamics

This free online course features a range of topics designed to explain how thermodynamics can be implemented to effectively solve engineering problems. The course explains basic concepts such as systems and state postulates, specific heat and gravity, and temperature and pressure scale. Through questions and illustrations, you will learn about the theories and practices of this technology and its applications in industrial machinery.

In this free online course, you will gain an in-depth understanding of the science of thermodynamics. You will learn about its technologies, applications and benefits.
The course begins by explaining some basic concepts associated with thermodynamics, such as systems and state postulates, specific heat and gravity, temperature and pressure scale, equilibrium and processes. Energy and efficiency of machines are analyzed, as well as the equations of state and the working principles of heat engines. In addition, you will learn about the principles of Entropy and Exergy.
The following part of the course focuses on power cycles, processes associated with gas power cycles and vapour power cycles. Finally, you will explore thermodynamic property relations and chemical reactions. This course will be of interest to students studying science and engineering courses. It will also be beneficial to those working in the industrial sector, as well as those seeking employment in this area. Start this course today and learn more about engineering thermodynamics.

Unlock 800+ Free Certificates: Master Tech & Soft Skills with CodeSignal Learn

BloomTech’s Downfall: A Long Time Coming

Harvard Launches Two New Free Certificate Courses

The Business of Online Education: A Deep Dive Into Coursera’s Financials

7 Best Technical Writing Courses to Master Documentation and Communication

2U Abandons Bootcamp Business, Announces More Layoffs

Udemy is “Intentionally Reducing” the Business That Made It Famous. It’s Not Working.

31 Most Popular Online Courses Starting in June 2024

Learn Something New: 100 Most Popular Courses For December

8 Best Geology Courses for 2025

Udemy vs Coursera: Comparing Online Learning Giants that IPO’d in 2021

White-Labeling in Online Education: Whose Credential Is It Anyway?

A Decade of MOOCs: A Review of MOOC Stats and Trends in 2021

900+ Open University Free Certificates

70+ FutureLearn Courses with Free Certificates

5 Best Free Raspberry Pi Courses for Beginners in 2025

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.